Operable Folding Wall ALATAR

CONTINUOUSLY HINGED OPERABLE FOLDING WALL ALATAR

Wallenium’s soundproof operable folding wall system ALATAR is ideal for dividing and creating rooms.
The folding wall system can either be supported from the ceiling or the ground and is made up of wall panels that are connected by hinges and stored at the end of the track when opening the wall. There are sound insulation seals between the panels, ceiling and floor.

STRUCTURE
The ALATAR operable wall structure is composed of aluminum profiles, sheets of treated particleboard or MDF and insulation. The combined structure forms a panel that has a total thickness of 82mm and depending on the insulation material ensures a soundproof resistance of 45-49dB (decibels).
When the operable folding wall system ALATAR is supported at the ceiling it runs along an adjustable aluminum upper track that is equipped with bearings inside of carriages. This enables the walls height to be adjusted by ±15 mm. The carriages are installed on every second wall panel and are located at the center of the panel. Because the wall hangs from the ceiling, it is important for the installation of the wall that the wall is attached to something solid (i.e. concrete ceiling, steel structure, wood beam etc.).
In the case that the folding wall is supported by the ground, an aluminum track is installed on the floor where the carriages move the wall and at the top there is a guiding track. The height is also adjustable by  ±15 mm.
At the end of the wall, a jamb profile is installed to close the last panel and which is also used as a door. This, together with the jamb is installed to start the wall and allows for the walls width to be adjusted ±20 mm.

HARDWARE
Every panel of the folding wall is equipped with a sunken stopper which is used to lock the wall, using a separate handle/knob, into an opening recessed into the floor. The openings in the floor are covered with templates which are supplied with the wall. The separate panels of the wall are joined with hinges.

SURFACE TREATMENT
The standard colour for the track profile of the folding wall and the jamb profiles is white (RAL 9010) and the panels edge profiles are natural anodized.
There is a wide variety of panel surface treatments, from which a suitable one can be chosen:

· White melamine (standard);
· Coloured melamine (RAL and NCS catalogues);
· Decorative melamine
· Natural veneer
· Special solutions (laminate, magnet board, school blackboard, etc.).

As a special solution it is possible to install a glass opening in the center of the panel. The opening can cover the whole panel, the bottom or the top.
The maximum measurement of the glass is 150 mm in from the sides of the panel and 300 mm in from the top and bottom of the panel.

LOCK AND HANDLE
The last, outermost panel of the folding wall functions as a door when the wall is in a closed position, and is equipped with a roller lock and a recessed handle by Wallenium.
Upon request, a lock operated by a key, may also be installed.

FOLDING WALL TYPES:

1) The carrying roller is at the middle of the panel and the folding wall opens in one direction.     voldiksein-1 2) The carrying roller is at the middle of the panel and the folding wall opens in two directions   voldiksein-2

PRODUCT INFORMATION:

Thickness: 82mm (for all folding wall types)

Weight m²: 25-45 kg/m² depending on the sound insulation

Max height: 4000mm

Panel width: Min 400mm / Max 910mm

Sound insulation: Rw 45-49dB

Warranty: 2 years (valid only when installed by Wallenium Partition Walls)